jerrbitt
12-30-2008, 07:18 PM
I've made many plaques and install a typical picture hangar on the bag -- the type with a serrated edge.
My son called me to say thanks for his plaque and said why don't I carve the picture hangar. Got me to thinking about how that could be done.
I experimented with a small rectange 1/8 wide and 1 and 1/2 long with a small trangle (connected lines) at its center, cut to about .250 deep.
It will work but it would be better if the triangle was undercut.
Anybody have any ideas as to how to accomplish a "Carvewright hanger"?
My son called me to say thanks for his plaque and said why don't I carve the picture hangar. Got me to thinking about how that could be done.
I experimented with a small rectange 1/8 wide and 1 and 1/2 long with a small trangle (connected lines) at its center, cut to about .250 deep.
It will work but it would be better if the triangle was undercut.
Anybody have any ideas as to how to accomplish a "Carvewright hanger"?