Center Line with other graphics

[TomW]

When using the Center Line application, can I combine it with other graphics? Will the CW ask me to change bits?

[Kenm810]

Centerline is normally carved with the 60-V or 90-V Groove bit,
Most Graphics are carved with your 1/16” Tapered carving bit.
So your machine will ask you to switch Bits as they are needed.

But some graphics are carved using just the line tools in Designer can also be carved
With a 60-V or 90-V Groove Bit and may not have to be changed while carving your project
as long as the text in Centerline and the Graphic are using the same Bit.