Our Holiday Card

[Kenm810]

I used a 90-V Groove Bit to carve the 12" x 14" x 1/2" MDF Board,
and Faux finished it with water base Black Cherry Stain,
then sanded it with 180 Grit random orbital sander,
1 coat of Amber Shellac and two coats of Clear Gloss Lacquer.

[Kenm810]

Well it’s December again, and around here the Snow starting to fly.
Thoughts are turning towards Hearth and Home, Family and Friends,
And Hopefully the True meaning of Christmas,
So Here’s Our Holiday Card to You.


To all the fine Folks at LHR and all those on the CW Forum out there,
A Warm Heart Felt Seasons Greetings form Barb and I,
Wishing you all a Safe and Very Happy Holidays!

[RayTrek]

Thank you Ken and Barb may you also have a wonderful holiday season
Love your Angels art.
Cheers-Ray

[mtylerfl]

Hello Ken,

Same to you and yours! Thank you!

[cnsranch]

And stay out of the egg nog :)

All the best to all.

[beachman]

the best to you and your's always

[Eagle Hollow]

Thank you, Ken and Barb. Joanne and I send our best wishes to all viewing this.
Attached is mpc of our card.

[IM2HAPPI]

Ken and Barb(ie) my fondest gift as a child, and to Eagle Hollow, awww Dottie Rambo (Rip) He left the splendor of heaven.What a beautiful song.
Barb

[LittleRedWoodshop]

guys for the files and the reminder that it is the Christmas Season. Time to slow down for a minute and reflect.....

[twinpeaksenterprises, LLC]

Nice Work Ken!!! "Merry Christmas" to everyone also!!! Good time to say thanks for all the help this past year. Everyone have a safe and happy holidays. Snow Flurries all day here in South Ohio, puts me in the Christmas spirit. Matt.

[Rocky]

I was really impressed when I saw what Ken did with a few curved lives. I wish I had that talent. I carved his MPC on a piece of 3/4" oak plywood. I was expecting some chip-out on the veneer, but surprisingly, it came out chip free. Again, give all the credit to Ken. I'm showing it here just to his design on a piece of plywood.

Thanks, Ken.

[BBrooks]

Thanks and a Merry Christmas to all.

My bit set is on back order so no ho ho ho for me yet. :)

Cheers,

[Kenm810]

Rocky,

Glad you like the carving, and Happy to see it worked for you on Plywood, it looks really good.
You can carve it with either "V"-Groove bit 60 or 90 Degree, to suit your own preference. http://forum.carvewright.com/images/smilies/icon_wink.gif

[Dan-Woodman]

Bill
Is your bit set on back order from LHR or somewhere else? Littleredwoodshop, Lowe's, Woodcraft???
later Daniel

[BBrooks]

Bill
Is your bit set on back order from LHR or somewhere else? Littleredwoodshop, Lowe's, Woodcraft???
later Daniel

I bought my machine and bit set through Amazon.com. I wish I had gone with LRW but I had some trouble with the store and went with Amazon. No reflection on LWR as Jason was very helpful via several e-mails with helping me to make the decision to buy. When I am ready for the probe scanner I will surely get it from him.

cheers,