hardly
11-24-2008, 01:48 PM
I had a simple text plaque to make. Three lines of a couple words each. One line used outline text and the other used centerline. When I ran the job it asked for the carving bit and then the 60 degree bit, measuring both. It then asked for the carving bit again and remeasured it. It then moved to start the carving but stopped with a Z axis stall. It had jammed the carving bit into the wood creating a dent. What is wrong with the machine?
BTW I needed to get the job done so I simply erased the centerline text and the outine text part ran fine. I then unerased the centerline text and erased the outline text. It then also ran OK. Together they fail, separately they run. A software or machine bug?
BTW I needed to get the job done so I simply erased the centerline text and the outine text part ran fine. I then unerased the centerline text and erased the outline text. It then also ran OK. Together they fail, separately they run. A software or machine bug?