View Full Version : 1/16th Cut bit
LollyWood
11-13-2008, 11:45 PM
Quick question,
On what bit selection is the 1/16 cut bit used? Have a 1/8 no 1/16.
Use 131 for small cutouts. Nice control on finer cuts.
Thanks in advance,
fwharris
11-14-2008, 12:16 AM
Quick question,
On what bit selection is the 1/16 cut bit used? Have a 1/8 no 1/16.
Use 131 for small cutouts. Nice control on finer cuts.
Thanks in advance,
Bernie,
The 1/16 bit is for cut outs. If you select a cutpath on a pattern at the top of the pop up window is the selection for the bit.
LollyWood
11-14-2008, 12:35 AM
Use the right SW. 131 not 126:rolleyes:
Thanks Dr Harris
rstudley
11-14-2008, 06:23 AM
Use the right SW. 131 not 126:rolleyes:
Thanks Dr Harris
I recently picked up a 1/16 bit. Can you explain the terms SW 131 not 126? Thanks
supershingler
11-14-2008, 07:21 AM
that is is the software version
1.31 is the latest with the new upgrades that you can set depth of cut per path
kendall
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.