Sonic Scrubber

[Deolman]

It is called a Pro Detailer, Automotive Cleaning Tool and it is also found at www.sonicscrubber.com. The company is:

Sonic Scrubbers LLC
PO Box 160130
Clearfield, UT 84016-0130

The number under the barcode is: 1-84119-00013-4

The head is approximately 5/8" and is removable

The "Interchangeable Brushes" pak contains 4 brushes. 2 with an approximate head of 5/8" and 2 with 1-3/8"

The number under the barcode is: 1-84119-00040-0

I was planning on removing the bristles and attaching the abrasive to the head. Maybe using a rubber type of pad first. I figured with the extra brushes I could use various grits or 3M pads or ??? The oscillations of the head are quite fast. I suspect with the right grit it could be quite aggressive. As posted earlier, I purchased mine at Walmart.

[Tom75]

i baught it in may or jun . and pulled the bristles off and put some velcro on it it is a little agressive depending on the grit . i use sand papper withe the velcro back or i stick a pice on it and also use a thin sanding spong of different grits i get from the local hard ware store . have a good night

[dench]

get you a sanding mop 320 grit they work very well