View Full Version : 1/16 inch cutting bit
jerrbitt
11-07-2008, 01:16 PM
Trying to st up a cut path but do not see in the selection of cutting bits the new 1/16" cutting bit.
How is that selected to cut?
ChrisAlb
11-07-2008, 01:39 PM
From the top drop down menu in the cut out control dialog box.
Is the 1/16" cut bit out yet?
liquidguitars
11-07-2008, 01:42 PM
yes it out on the Carvewright site, I have not had a chance to try it yet..
LG
Digitalwoodshop
11-07-2008, 01:42 PM
From the top drop down menu in the cut out control dialog box.
Is the 1/16" cut bit out yet?
I believe it is..... I will order some on my next order.
AL
ChrisAlb
11-07-2008, 01:56 PM
That's cool. Should be interesting to see what it's capable of. Since I'm just getting caught up with the new software and such, I imagine there's a pretty thin limit that it can cut through? Even with the new "Set the pass depth" option?
Amonaug
11-07-2008, 02:31 PM
That's cool. Should be interesting to see what it's capable of. Since I'm just getting caught up with the new software and such, I imagine there's a pretty thin limit that it can cut through? Even with the new "Set the pass depth" option?
Think it's limited to 1/4"
Deolman
11-07-2008, 03:09 PM
When I was at their demo at the wood show a couple of weeks ago, I picked up one of the 1/16" bits. They went fast. The cutting area or length is only approximately 3/8". (If someone needs an exact size I can go measure it.)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.