View Full Version : Carving a box around a picture
dougswanson
10-13-2008, 03:37 PM
I'm trying to carve a box around a picture I'm making. I have a carve region I'm working in and I have some text above and below the picture. What I'm trying to do is carve this box around the picture to offset it from the words. I've tried to use the rectangle tool to set up the box and then choose a bit to perform the task but it doesn't show up on the pattern. Is there a better way or am I not even doing this task correctly.
Thanks Doug
Kenm810
10-13-2008, 03:52 PM
Hi Doug,
Something like this?
I normally let Designer use the default 1/16" tapered carving bit carve the carve region.
dougswanson
10-13-2008, 04:05 PM
No I just want a line all the way around the picture. It's already in a carve region and is recessed. I don't want to have a second carve region around the picture, just a line around it.
Doug
dougswanson
10-13-2008, 04:16 PM
16381
Here's what I'm trying to do. I want to just carve a box where the white lines are. Kind of making a frame inside a carve region.
Doug
Amonaug
10-13-2008, 04:28 PM
16381
Here's what I'm trying to do. I want to just carve a box where the white lines are. Kind of making a frame inside a carve region.
Doug
When you assign the bit to the path you have to set the depth a little deeper than the carve region. So if you want a 1/8" deep line around the picture and it's in a 1/4" deep carve region you must set the path depth to 3/8" or .375
dougswanson
10-13-2008, 04:53 PM
Thank you for that information. I can atleast see the carve line now. Is it possible to use the carving bit on this? When I go to select the bit it is not an option.
Doug
Kenm810
10-13-2008, 05:16 PM
It looks like you can.
dougswanson
10-13-2008, 05:21 PM
So the 1/16" bullnose is the same as the carving bit?
Doug
Kenm810
10-13-2008, 05:25 PM
Yep, samething just two different names. http://forum.carvewright.com/images/smilies/icon_wink.gif
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.