z axis stall 238

[castingman]

Hey Guys,

My CW has been running good for almost a year, Now the z axis stall 238 comes up and i can't get any help from search

Thanks Michael

[Jeff_Birt]

When does this error occur? When it is testing the bits? While Carving? If you turn the machine off (and wait a minute) does the Z-truck move up/down smoothly by hand?

[castingman]

Jeff

It started with check board sensor that i cleaned up and now go's right to z axis stall , every thing moves with no apparent problem .

Michael

[atauer]

so when you turn the machine on and select the project, it gives a z-stall?

[castingman]

I made a mistake , It's y axis stall 238 And it goes into it right away .

Sorry for the delay , wife wanted to go to dinner !!

Michael

[Digitalwoodshop]

Loose cable on the motor is one possibility. With power on and you use options to look at the Y Encoder data, it looks normal when you move it by hand?

Give me a call if you want to walk through it.

# is on the web site.

AL

[castingman]

AL

Thanks , is that the brass roller ?