PDA

View Full Version : Port On Back Of Machine


unitedcases
08-26-2008, 12:31 PM
Does anyone out there know what the port is on the back of the machine?
atauer
08-26-2008, 12:32 PM
The port on the back of the machine is used at the manufacturer for configuration of the machine. You should not connect anything to it.
unitedcases
08-26-2008, 01:13 PM
AHHH, Thanks, it has really been bothering me plus people keep asking me and I have no idea.
liquidguitars
08-26-2008, 02:40 PM
The port on the back of the machine is used at the manufacturer for configuration of the machine. You should not connect anything to it.

no! it's for running 20 units at a time with one flash card!
just needs a robot to turn the wood to the "b" side :)

LG
Deolman
08-26-2008, 04:22 PM
lg you are bad!!!!!!!!!!! LOL
jspringertx
08-26-2008, 05:44 PM
Does anyone out there know what the port is on the back of the machine?

If they ask too many questions just turn on the machine and they will leave immediately. It saves you time.
AWoodsmith
09-03-2008, 02:48 PM
LOL, that is how I keeep my wife out of my shop, just hit go and she goes....LOL
Audie
09-03-2008, 02:54 PM
The port on the back of the machine is used at the manufacturer for configuration of the machine. You should not connect anything to it.

:confused: Uh oh....so ummmm connecting my computer directly to the CW with a 25 pin cable wasn't what that port was designer for? Ehhhhhhhhh gads!
Audie
09-03-2008, 02:54 PM
:confused: Uh oh....so ummmm connecting my computer directly to the CW with a 25 pin cable wasn't what that port was designer for? Ehhhhhhhhh gads!

HAHAHAAHA....not really!