View Full Version : insert
lviele
08-03-2008, 01:57 PM
on the bit selection there is an option called insert what does it di its not in the help menu
DocWheeler
08-03-2008, 02:41 PM
lviele,
I believe that you are talking about the inset box where you control the bit-center offset. This allows you to position the actual bit-center a small amount (plus or minus). I find it most useful to move the 1/8" cut-out bit to the outside of the object the radius of the bit (-.063).
liquidguitars
08-03-2008, 02:46 PM
Inset - you can place the location of the bit numerically to your paths.
I find it most useful to move the 1/8" cut-out bit to the outside of the object the radius of the bit (-.063).
that the number! -.063
Note: In 1.126 you can not use this tool with "outline paths" so you will need to use 1.130 to get the full usage.
LG
DocWheeler
08-03-2008, 02:51 PM
Brandon,
I'm not sure I understand what you are saying. I use 1.126 and the inset option regularly!
liquidguitars
08-03-2008, 02:58 PM
Hi Doc,
can you use "outline path" from a raster image with "inset ajustments"?
i am using selds so cut path is a no go..
LG
Amonaug
08-03-2008, 03:18 PM
Hi Doc,
can you use "outline path" from a raster image with "inset ajustments"?
i am using selds so cut path is a no go..
LG
Yes you can
liquidguitars
08-03-2008, 04:09 PM
how?
make a outline path from a raster, select the path,
select your router bit, 1/8 is cool.. go to "inset" is the inset path menue box not ghosted? if not, is the inset haveing a effect
in Designer?
LG
ChrisAlb
08-03-2008, 04:13 PM
how?
make a outline path from a raster, select the path,
select your router bit, 1/8 is cool.. go to "inset" is the inset path menue box not ghosted?
LG
Same way you do any vector path. This has been a feature from the first version. An outline is just an automatically drawn vector path. What bums me is you can't "break" them or circles and ovals.
I just put 1.20 on my laptop and it's there. 1.20 was the first version I used. I don't know if there were any earlier ones back in the beta days?
liquidguitars
08-03-2008, 04:27 PM
thats right it was and i was using it!
but I could not get insets to work with 1.26 at all. "outline generated paths" that is.
Hand made paths yes, raster outline no..
Edit:
Chris, Doc and Amonaug your right!
i installed 1.126 and like you said it works. it was version 1.123 that was not working ...
LG
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.