Minimum board size

[Rocky]

I just noticed that there is a discrepancy between CW Manual and CW Designer regarding minimum board size.

Manual: "The minimum acceptable size of a workpiece that can
be inserted into the CarveWright is 1.5 inches wide x 0.5 inches thick x 7
inches long. It will be necessary to mount the workpiece onto a jig if any
single dimension is smaller than the stated minimums."

Designer: 6 inches long, 1.75" wide, .25" thick.

Which is right?

[Kenm810]

Hey Rocky,

1.5 inches wide x 0.5 inches thick x 7 http://www.carvewright.com/forum/images/icons/icon14.gif
But you can carve .25, plus shorter or narrower projects with the aid of a sled or Carrier Board