RaccoonFace
06-18-2008, 03:12 AM
I've been poking around for a while, and I've misplaced some of my threads so I'm posting this as a sort of one stop shopping for someone who is just opening their machine to find info without searching too much as I've tried searching for some of the threads I know exist but keep getting error messages in the search or lists of threads that are not applicable.
If anyone else has some links saved feel free to post them. This, I believe, will make it easier for new people to be aquatinted with the machine and possibly nip repeated questions in the bud. And, maybe I won't have to search for the rest of the threads I know are here.
Ok, here is what I've found to be important and insightful... Not all of it because it's almost 1 am, so I'll have to post a bit more tomorrow.:
First post that needs to be read (Your new tool's manual. I've read it a couple of times and I still don't remember a lot, so I'd suggest keeping this handy):
http://www.carvewright.com/forum/showpost.php?p=11264&postcount=4
Second (Things you should be aware of before you open the box):
http://www.carvewright.com/forum/showpost.php?p=31639&postcount=1
Technical Threads:
How to lube and with what:
http://www.carvewright.com/forum/showthread.php?t=1470&page=9
Common Board Sensor Error (http://www.carvewright.com/forum/search.php?searchid=286445):
http://www.carvewright.com/forum/showthread.php?t=6298&highlight=board+sensor&page=2
http://www.carvewright.com/forum/showthread.php?t=7666
http://www.carvewright.com/forum/showthread.php?t=6601&highlight=board+sensor+lens
Free Lube:
http://www.carvewright.com/forum/showthread.php?t=7619
Loc-Tite (http://www.carvewright.com/forum/search.php?searchid=286431) and You:
http://www.carvewright.com/forum/showthread.php?t=7668&page=2
Troubleshooting PDFs:
http://www.carvewright.com/forum/showthread.php?t=2073&page=3
okbye
Key words (hopefully it'll get picked up more easily in the search):
new machine out of the box pre prep first cut check loctite lube moly oil grease sensor board motor axis
If anyone else has some links saved feel free to post them. This, I believe, will make it easier for new people to be aquatinted with the machine and possibly nip repeated questions in the bud. And, maybe I won't have to search for the rest of the threads I know are here.
Ok, here is what I've found to be important and insightful... Not all of it because it's almost 1 am, so I'll have to post a bit more tomorrow.:
First post that needs to be read (Your new tool's manual. I've read it a couple of times and I still don't remember a lot, so I'd suggest keeping this handy):
http://www.carvewright.com/forum/showpost.php?p=11264&postcount=4
Second (Things you should be aware of before you open the box):
http://www.carvewright.com/forum/showpost.php?p=31639&postcount=1
Technical Threads:
How to lube and with what:
http://www.carvewright.com/forum/showthread.php?t=1470&page=9
Common Board Sensor Error (http://www.carvewright.com/forum/search.php?searchid=286445):
http://www.carvewright.com/forum/showthread.php?t=6298&highlight=board+sensor&page=2
http://www.carvewright.com/forum/showthread.php?t=7666
http://www.carvewright.com/forum/showthread.php?t=6601&highlight=board+sensor+lens
Free Lube:
http://www.carvewright.com/forum/showthread.php?t=7619
Loc-Tite (http://www.carvewright.com/forum/search.php?searchid=286431) and You:
http://www.carvewright.com/forum/showthread.php?t=7668&page=2
Troubleshooting PDFs:
http://www.carvewright.com/forum/showthread.php?t=2073&page=3
okbye
Key words (hopefully it'll get picked up more easily in the search):
new machine out of the box pre prep first cut check loctite lube moly oil grease sensor board motor axis