jerrbitt
05-26-2008, 07:33 PM
Found out after removing the RPM sensor, that I could detect the cover holding the magnet was shredded.
Called LHR and they said they will send me a new motor. In the meantime I took the motor off. But have not been able to disassemble it for a thorough inspection and possibly salvage some parts. I removed all the screws holding the two halves but there must be a trick to break open the motor.
I have seen posts of the motor disassembled and before I take the "pry bar" to it, like to know if there is some technique to use.
Called LHR and they said they will send me a new motor. In the meantime I took the motor off. But have not been able to disassemble it for a thorough inspection and possibly salvage some parts. I removed all the screws holding the two halves but there must be a trick to break open the motor.
I have seen posts of the motor disassembled and before I take the "pry bar" to it, like to know if there is some technique to use.