PDA

View Full Version : Using Craftsman Qc Router Adapters



LABMAN
05-13-2008, 07:09 AM
Does Anyone Know What Model Of The Craftsman Qc Router Adapters Fit The Carvewright. They Make Three Models, One For Newer Routers, One For Older Machines, And One For Bosch, I Believe

Jeff_Birt
05-13-2008, 08:19 AM
Search my friend! If you had used the search tool, you would have found that the answer is that none of the Craftsman QC chucks will fit the CW.

forqnc
05-13-2008, 12:13 PM
Hey, Labman, why not check your post from a few days ago.

http://www.carvewright.com/forum/showthread.php?t=7360

Towards the bottom, you will find sears do not sell one for the CC/CW

Dan-Woodman
05-13-2008, 04:59 PM
The key word here people is "adapters" and yes the craftsman adapters do work in the cc/cw. The chucks will not but the bit adapters will.
later Daniel

Jeff_Birt
05-13-2008, 05:40 PM
Doh! Good call Daniel. I guess I was a bit thrown off by mention of the diffrent router types. Daniel is correct. The adapters are the same, the chucks are not.

forqnc
05-13-2008, 06:17 PM
The key word here people is "adapters" and yes the craftsman adapters do work in the cc/cw. The chucks will not but the bit adapters will.
later Daniel

Nice catch Daniel, sorry Labman.




Exits quietly from the side of the stage...........

LittleRedWoodshop
05-13-2008, 07:22 PM
sells them for $9.99 for 3. Yes, you can get just the adapters from SEARS. they come in 1/2 inch and 1/4 inch.

or check ebay, found this in about 2 minnutes, click here (http://cgi.ebay.com/Craftsman-Quick-Change-Router-Bit-Adapter-Connector_W0QQitemZ350027182564QQihZ022QQcategoryZ 50387QQrdZ1QQssPageNameZWD1VQQcmdZViewItemQQ_trksi dZp1638Q2em118Q2el1247) I actually bought 3 of these sets. got 4 adapters per package for around $2.50 each. Chepest price I could find.