Dan-Woodman
05-10-2008, 09:25 PM
Here are the end panels of a rolltop bread box I'm getting ready to make if anyone wants it. The 1/8" line outside profile, is only .020 deep. I will cutting this out with my scrollsaw.
The back and top are not going to be seen, so the back will have 1/4" Oak ply, and the top will have 1/2" Birch ply,as it is going to be mounted under a cabinet.
This project will be made from 3/4" Oak , about 23" long. Special order, thats what the custom wants.
later Daniel
The back and top are not going to be seen, so the back will have 1/4" Oak ply, and the top will have 1/2" Birch ply,as it is going to be mounted under a cabinet.
This project will be made from 3/4" Oak , about 23" long. Special order, thats what the custom wants.
later Daniel