not carving right

[wooden nickel]

I 'm not sure how to explain this.My carver was doing crazy things while measuring board. I got started carving,it started routing the edge,but it wouldn't stop when finished. It also asked for bits I didn't have or know were part of the bunch of bits.Any help would be appreciated , I have read plenty but couldn't find any reference to my problem.

Thanks for any help.
Wooden nickel

[Jeff_Birt]

Can you post the MPC file?

[wooden nickel]

Jeff i can't do much with this computer as idon't understand computer language. I have to read alot ibuy patterns because ican'tput together many of my own.I don't know if this will help it was that mothers day vector carving.

Thanks,
Wooden nickel

[Kenm810]

Wooden nickel,

If per chance it’s the drawing I did, you can delete the decorative OG. Edges to eliminate one of the two Bits used to make the Drawing
and add it later with a hand or table router.
The rest of the carving is done with the same 60 degree V-Groove Bit we use the carve Centerline text like the font I carved on the Drawing.