PDA

View Full Version : Price list



roughcut
04-30-2008, 05:34 PM
Is there a parts price list for things like the QC, cut motors etc. or do you just have to call CW every time you want to order a part/
Bill:):)

Steven Alford
05-11-2008, 06:30 PM
I am bumping this post because I think it would be nice if some of you guys that have bought a good share of parts might be able to fill this in.

Steve

Eagle Hollow
05-12-2008, 06:11 AM
I am bumping this post because I think it would be nice if some of you guys that have bought a good share of parts might be able to fill this in.

Steve

My new flex shaft cost $54 plus $12 shipping & handling.

Jerry
1.126

MAX COX
05-12-2008, 06:50 AM
I Bought A New Z Motor Mount Assembly. It Cost $42.00 Plus $12.00 Shipping.

Kenm810
05-12-2008, 08:00 AM
Here's a few I bought from LHR


Y Motor Mount Assembly MVM A2052 $42.50
Quick Change Chuck A005-00033 $29.95
Closeout Right Assembly MWM A2005 $18.00
Board Sensor Assembly MWM A2019 $15.00
Bit Adjustment tool CW0021 $14.99
Traction Belts A2119 $14.99
Board Cable Guard MWM P1289 $5.00
Micro Switch w/o Lever P005-00006 $5.00

LollyWood
07-21-2008, 07:54 AM
Any new Z Pack, X Gear, and cut motor prices?

Beauler, Beauler.....any one...Beauler?

Bubbabear
12-01-2008, 01:17 PM
Any x-gear prices yet please. Also standard 1/8 and 1/16 cutting and or carving bits. Bits only not bit and adapter

thanks

mtylerfl
12-01-2008, 02:35 PM
Any x-gear prices yet please. Also standard 1/8 and 1/16 cutting and or carving bits. Bits only not bit and adapter

thanks

Might want to call LHR directly for any pricing - note: I don't think they sell the bits without the adaptors.

HelpBot3000
12-01-2008, 03:02 PM
Might want to call LHR directly for any pricing - note: I don't think they sell the bits without the adaptors.

Close, we don't sell the 1/16 Carving Bit or the 1/8 Cutting Bit without the adapter. Also we don't sell the other bits WITH the adapter included, it has to be ordered as well. The only exception to this is the full bit set in which all of the bits have adapters, which is why they are the best value in my opinion. Not to mention the magnetic case.

HelpBot3000
12-01-2008, 03:05 PM
Hey guys and gals, I just wanted to mention that these prices that are being listed are subject to change and from time to time they do. Its all based on the cost to the company and usually when a price change happens its pretty quick and with little or no warning. What I'm trying to say here is that just because you see a price listed in this thread doesn't necessarily mean that when you call up here you're going to hear the exact same price. That's why we don't offer an "official" price listing.

Hexe SA
12-01-2008, 04:00 PM
Could LHR put the flex shaft lube in its store for purchase? As I've seen some people have a hard time finding it locally.
Thanks
Eva

Bubbabear
12-01-2008, 04:01 PM
Ok got my x-drive gears ordered $9.00 for #1 xdrive gear $5.00 for the #2 x-drive gear. Couldnt order the screws for the slide bar because the part number on the parts list did not register when they tried to order them. Guess I will have to go to industrial supply for those two screws

Bubbabear
12-01-2008, 04:05 PM
Could LHR put the flex shaft lube in its store for purchase? As I've seen some people have a hard time finding it locally.
Thanks
Eva


Eva ACE hardware can get it with no problems here is the ACE part number L716 and the SKU is 80099
or take them this then they can order it for sure https://www.acehardwareoutlet.com/(quacoxuudcttdu55yvi21g45)/PrinterFreindlyPage.aspx?SKU=80099

whr1900
12-01-2008, 04:36 PM
Car quest carries the molly grease for the flex shaft but you have to buy a big tube and it is reasonably cheap for what you are buying

William