sweliver
03-20-2008, 04:03 PM
Today I planed, jointed, resawed, 24 bf of walnut. Brought home another 20 bf of surfaced birch. Rec'd my scanning probe and 3/8 str cut bit from CW. Rec'd about 5 sq/ft of 1/4 Corian. Glued up a new sign board, modified my sign sled. Revamped a couple signs in designer. As we speak the machine is happily carving a 2.3 hr project included below. It's based off the flying eagle NRA tutorial. The left side of the light house will be the board edge, the top right arched piece will be cut free. I'm making this sign for our anniversary trip to Door County, WI. We started RV'ing a couple of years ago and I thought it would be unique to have a sign prepared for each trip.
Gotta go vacuum out the machine.
Steve
Gotta go vacuum out the machine.
Steve