View Full Version : Sled wall measurements
nextcarve
01-19-2008, 10:29 PM
I am putting together the sled and need to know what are the max measurements for the walls.
Thanks!
Nextcarve
DrBob
01-20-2008, 08:19 AM
Hi Nextcarve
Here is a PDF on sleds
nextcarve
01-20-2008, 05:43 PM
Hi Nextcarve
Here is a PDF on sleds
I got it.
Thanks Bob!
lviele
02-05-2008, 11:21 AM
seems you know something about sleds so maby you can help.
1.I select a board for the sled say 3/4 12x12,call it the sled
2.I select a 1/4" board to put a pattern on, call it the board
3.I glue the board to the sled Where is the best location?
4.I jog the board under the measuring probe, The machine now thinks I have a 1" board, 12x12
5.In the drawing I have located the pattern on the board,not the sled.
6. only problem is I cannot use the cut tool because it will cut through the board and the sled.
The other possiability is that I tell the machine that the board is only 1/4" thick. The machine measures the top of the board and proceeds as if the board were supended in air.
We have a new 4" of snow and it is 14 deg so I can't try the machine today
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.