Mirroring

[oldjoe]

I just noticed something that many of you probably already knew but I figured I would post it just in case
I layed out a project and I mirrored on of the figures I had in the other corner. And as many of you are aware when you mirror something if you move on the other one moves in accordance with it. But what I did was I copied the whole project and pasted it onto another board so I could run two projects thru. But after I did that when I went to adjust the mirrored figures they moved independently of each other.
Just thought I would share it for what it was worth.

[TerryT]

Thats interesting. I haven't run into that yet.

[Jeff_Birt]

In my case (1.125) I placed one object (top left corner), did 'Mirror All' and then copied the resulting objects over to a new longer board. This resulted in the two right most objects being independent but the two left objects still being bound by mirroring. Very interesting.....

[Kenm810]

Again with 1.125 on mine --- different combinations
The the upper and lower left were tied together when moving the upper left
and the the upper left and right moved together when moving the upper right
but when moving the lower right it was totaly independent

Really Odd http://www.carvewright.com/forum/images/smilies/icon_confused.gif combinations 4-3-2-1-none but rotate one and the all rotate
and delete is affected also, delete upper left and they go,
delete any of the others and they leave independently