View Full Version : Carving a picture from a digital Camera...
jdwykrent
12-17-2007, 11:25 AM
I can't seem to get a good quality carve. I have used the bit Opt. tool and set it to best....I have also set the quality to best when uploading to the card.
Any other tips?
Wykrent
Durtdawber
12-17-2007, 11:51 AM
Make sure you have cleaned up all the "jaggies" in the picture then apply a slight blurring effect.
jdwykrent
12-17-2007, 11:58 AM
jaggies? What are those?
Durtdawber
12-17-2007, 12:19 PM
zoom in on the photo. look for ragged edges and smooth them out.
Dirtydan
12-19-2007, 12:09 PM
Send me a copy of the picture...or upload it to my website... I'll take a look at it and then we can go from there...
It sounds like your on the right track, but clean-up and how the picture is saved make a difference.
Let me take a look at both your pictuer and Designer file (.mpc)... We'll see what we can do.... OK
I can't seem to get a good quality carve. I have used the bit Opt. tool and set it to best....I have also set the quality to best when uploading to the card.
Any other tips?
Wykrent
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.