rengaw
12-16-2007, 03:40 AM
I'm sure Jeff is real busy, so until if and when he has a chance to get the "Life size" feature working again, does anyone have any tips on how to scale a scan to 100%?
I was and am still told by Carveright Tech support that the probe scans full scale, but it doesn't. This was the whole reason the machine was purchased, and now that 1.120/1 is no longer supported, I'm dead in the water.
I read a post in the probe area, but it did not really provide a good answer.
Hope this the right forum to post this.
Any ideas and thoughts sure would be a great deal of help.
Guess I don't understand the reason the scans are undersized.
Thanks!
Steve
I was and am still told by Carveright Tech support that the probe scans full scale, but it doesn't. This was the whole reason the machine was purchased, and now that 1.120/1 is no longer supported, I'm dead in the water.
I read a post in the probe area, but it did not really provide a good answer.
Hope this the right forum to post this.
Any ideas and thoughts sure would be a great deal of help.
Guess I don't understand the reason the scans are undersized.
Thanks!
Steve