Releasing Centered/Aligned opjects

[Mel Sloan]

I'm just another newbie.

With Designer is it possible to release and relocate a pattern that has been centered or aligned without using the undo function. If I have a group centered and want to move the group, I have to delete the group then reinsert the patterns again.


When I draw long horizontal lines and the snap is on the line always jumps to the next vertical snap line. The only way I found to correct it is to set the angle back to "0" degrees after I draw the line.

Thanks

[HerbO]

Hi Mel,
Click on the pattern and click on the align button again.
If the pattern is center aligned go up and click on the centered button and it will unlock it.

[forqnc]

As HerbO said, once you centered a pattern, if you right click and go back up to the centering options, you should see a light blue box showing how it is centered. Click this box again and it will release it. Also if you change a dimensions manually, going from green to yellow, you can again right click the dimension and you should see the option to 'Remove Attachment'

[Mel Sloan]

Thanks guys for the help, perhaps I'll be able to help someone someday.