Bringing together Laser, Sublimation and V Carving in one project.

[Digitalwoodshop]

Here was a chance to put my favorite things together, Laser Engraving, Sublimation and V Carving. This is a Display I was off to deliver tonight but a rusted brake line stopped that... Better in the driveway then a Stop sign....

I might still color fill the engraving and the V Carving as it does not stand out. The License Plate, T Shirt, Back Board, and Bumper Stickers are Subliminated.

AL

[Digitalwoodshop]

Had a change of plans with the blocks and decided to carve them after I had cut them so I used a 1/4 in plywood as a sled. Worked fine as long as I taped over the gaps and used blocks the same length on the ends.

AL

[Jon Jantz]

Good Stuff, DWS.....

[rjustice]

Looks nice Al !

Ron