MarkJamesDesign
04-03-2007, 09:11 PM
I know this machine is not designed to cut or carve metal, but I think it could handle this. I regularly use a sign material called Dibond or Signabond. It is about 1/8" thick and consists of a polymer composite core similar to HDPE with a .010 aluminum face on each side. I machine this material easily with my router and the aluminum skin is about the thickness of the walls of a soda can and can be cut with a razor knife. I was wondering if anyone had cut any material with a metal face or skin.
I think I will call CarveWright to be sure it would not void my warranty.
I think I will call CarveWright to be sure it would not void my warranty.