pattern depth

[Michael Anthony]

question for Ask Bud; I am interested in purchasing your angel pattern with the horn, but I am concerned with the depth of the carve. The jewelry box I am making has doors 3/4" thick, but I only want to

recess the pattern a 1/4 into the panel. is that possible, my doors are 3/4X4.5X12 with a half arch on top the 12" is the height I want to insert the angels into an oval 3.5" wide by 10 " tall but only recess into the panel 1/4". would that be possible with this pattern? Thanks in advance for your help!

[want2b]

Unfortunately for us Bud is deceased. We're fortunate to be able to use all his tutorials. I think you should be able to control the size and depth of the carve when you create your MPC.
Rick H

[Michael Anthony]

OK thanks for the information

[DickB]

You can download patterns no charge on a trial basis and adjust in Designer to see if they will work for you.

[fwharris]

Every pattern has it's own default depth but all can be adjusted/changed based on your need.

[DickB]

Every pattern has it's own default depth but all can be adjusted/changed based on your need.True, but some patterns may lose detail if the depth is set much lower than the depth of the pattern as originally design. That is why I suggested "try before you buy".

[fwharris]

True, but some patterns may lose detail if the depth is set much lower than the depth of the pattern as originally design. That is why I suggested "try before you buy".

And that is also true! :)