PDA

View Full Version : Help with an stl



cconway
04-26-2017, 03:48 PM
Hello all:

I'm a little new to the stl importer and am unsure how to properly pull this stl in so that it will be carved correctly. When I pull it in now its giving me the shape, but not the depth and such. I have attached a copy of the stl and would appreciate any help you could give.

Thanks!

Charlie Conway

fwharris
04-26-2017, 04:04 PM
Since it was less that 0.75" thick I did not slice it. You will need to uncheck the pierced box and reset the depth to what you need.

cconway
04-27-2017, 05:44 PM
Thanks for the help!!!