Rkoonz2
07-21-2016, 08:02 AM
I posted it on Craigs list, here is the info of what I posted.
Iv included the link so you can see the photos.
http://albany.craigslist.org/for/5640594826.html
I have a newer carvewright (C), an older one(B) and a few for parts...
The newer one that came with all the upgrades like rubber belts and the carve tight spindle, the second I upgraded the spindle.
Iv also customized the cover to be more useful by adding a safety pause switch and relocated the scanner sensor plug to a much less problematic spot.
I have extra covers if you don't want to use the customized one...
I have the scanning probe for it, a custom built scanning sled.
With this you can put things you already have and scan them, to recarve them. Useful if you want to reproduce something or make a new leg or trim for something from an old one.
I have a pine carving sled made from the pattern department and a 90% finished one out of oak.
I have lots and lots of extra parts, Carvewright shaft oil, extra motor brushes, 3 memory cards, 3 card readers, and bits... original box for the newer one
The two working carvewright a have the dust collector attachment on them. This saves you from lots of extra maintenance and problems that the dust normally from carving would normally create!
I also have a lot of custom scans of the things that I have carved.
Im asking 2000$ or best offer
Im moving and I would like to down size!
Im in East Berne NY...
http://albany.craigslist.org/for/5640594826.html
Iv included the link so you can see the photos.
http://albany.craigslist.org/for/5640594826.html
I have a newer carvewright (C), an older one(B) and a few for parts...
The newer one that came with all the upgrades like rubber belts and the carve tight spindle, the second I upgraded the spindle.
Iv also customized the cover to be more useful by adding a safety pause switch and relocated the scanner sensor plug to a much less problematic spot.
I have extra covers if you don't want to use the customized one...
I have the scanning probe for it, a custom built scanning sled.
With this you can put things you already have and scan them, to recarve them. Useful if you want to reproduce something or make a new leg or trim for something from an old one.
I have a pine carving sled made from the pattern department and a 90% finished one out of oak.
I have lots and lots of extra parts, Carvewright shaft oil, extra motor brushes, 3 memory cards, 3 card readers, and bits... original box for the newer one
The two working carvewright a have the dust collector attachment on them. This saves you from lots of extra maintenance and problems that the dust normally from carving would normally create!
I also have a lot of custom scans of the things that I have carved.
Im asking 2000$ or best offer
Im moving and I would like to down size!
Im in East Berne NY...
http://albany.craigslist.org/for/5640594826.html