insp_gadget
03-18-2007, 08:33 AM
I got my 2nd machine about 3 days ago and already done 3 projects that I've had done and ready. I used 1 program to put all 1/4 inch holes in side boards of 2 large shelving units. I also put a small unique personalization on one of them(just because I could). I also did a fairly large project that might become part of my new bar top. It is of my home state and football team, both of which I got from this forum. I'm also placing black granite tiles on my hearth and all the way around my fireplace. Around these I plan on putting some oak boards and some sort of mantle. I would like to use a combination of oak leaves and acorns for this. Anybody have anything like this or knows where I can get them?
As far as the machine goes, everything fine so far. Some things I've noticed are different, which could just be software upgrades, are the few extra moves head does when checking head height with flipper switch. Almost seems like it moves a little slower lengthwise which is fine as long as it works. Please don't think I am senile but when I opened the box I believe it even smelled different.heh-heh
Thanks, Steve
As far as the machine goes, everything fine so far. Some things I've noticed are different, which could just be software upgrades, are the few extra moves head does when checking head height with flipper switch. Almost seems like it moves a little slower lengthwise which is fine as long as it works. Please don't think I am senile but when I opened the box I believe it even smelled different.heh-heh
Thanks, Steve