First one in the oven !

[jwidmann]

Well I got through some of the learnign curve and here's what my first
project should look like when its done .

[Kenm810]

jwidmann,

Very nice, we’ll be watching for many more,
and waiting for photo of the finished project.
Ken

[Dan-Woodman]

Nice plaque,but don't you think that should read Susan & Jim's

[jwidmann]

Well,Susan's & Jim's or er Jim's and Susan's fineshed kinda ok. Found one
problem and looking for a possible second. The edges of the carving had a lot of 'chatter' hence the loose bit. The second is it is stray cuts in the board (see picture).So I'm open to sugestions.

ps. got to clear the mem card to take a pic. It will follow soon.

[rgant05]

You mention loose bit. Did you have or find a loose bit in the middle of the project and correct it? Also when you imported the cup, was it masked in a program and brought in nothing but the cup or did you bring a background in with it?

[pkunk]

PLEASE, POST ONLY IN ONE FORUM!
In the future duplicate posts like this will simple be removed.

[jwidmann]

First sorry for the double post.Second, The bit problem I can handle. The screws were in place just not tight.The mug was brought in as a .png with a transparent background.I think I better handle this in the trouble shooting forum.Thanks for your help.

[Gman_Ind]

Looking good post the next project you come up with.