PDA

View Full Version : question on litho settings



myshop1044
11-10-2015, 02:27 PM
I have just created a new litho and it just doesn't look sharp that is why I questioning my settings.
attached is the picture I used to create the pattern and the pattern itself.
The settings are depth of 200 and height of 400. should I have stayed at 180 or not.
please see attachments and give me your suggestion on the settings.
Fell free to adjust the ptn if you feel you can get a sharper image.
To the average customer it looks great, but to me it could be sharper.
My version is 3.0
thanks
Perry B.

fwharris
11-10-2015, 02:47 PM
I would stay at the 0.180 depth setting, less chance of a carve through. Try adjusting the height up or down. 300 (to me) looked a little better.

dbemus
11-10-2015, 03:24 PM
I think Floyd's settings make a big difference.

aokweld101
11-11-2015, 08:38 AM
Also I seen where you are using the 1/16 ballnose, if you use the 1/32 ballnose details really show up ( I prefer the 1/32 ballnose.)