T-Rex Puzzle Help

[DonCP]

I have the T-Rex Puzzle Project, The Instructions say to use 3/4 plywood but the MPC's are set to use 1/2 inch.
The cutouts appear to be for 1/2 inch also. Just wondering if anyone has run into this before.

Thanks

[henry1]

I have the T-Rex Puzzle Project, The Instructions say to use 3/4 plywood but the MPC's are set to use 1/2 inch.
The cutouts appear to be for 1/2 inch also. Just wondering if anyone has run into this before.

Thanks
It is 1/2 plywood my friend already did 2 of them

[DonCP]

Thank you for clearing that up.

[Mike1]

Hi Don, try to buy plywood that has a finish on both sides to prevent splintering, a bit more expensive but safer in its natural state. As well, for a nicer finish. Good luck.

[DonCP]

I was thinking of Baltic Birch.

[Mike1]

That is exactly what I have been making mine out of. Great for sanding and very little splintering for the kids. Good luck. e.mail me.