gwizpro
05-04-2015, 09:24 AM
Hi all,
Here is some info first.
C machine - just ran a simple project , then started second project and
received a clear board sensor. Cleaned sensor. Restarted.
Now received a z axis stall - cleaned and lubed rails - checked for free movement
So, now have 2 errors that continue.
Ran user test for x y and z and they performed perfectly.
Re formatted card and reload project.
Received board sensor - I pushed enter key and z axis was low and snapped bit.
New bit, New card new project and still receive the rrors.
Z axis stall and clear board sensor.
Could it be the cable or something more. Cable seems common to both errors.
Thoughts
Here is some info first.
C machine - just ran a simple project , then started second project and
received a clear board sensor. Cleaned sensor. Restarted.
Now received a z axis stall - cleaned and lubed rails - checked for free movement
So, now have 2 errors that continue.
Ran user test for x y and z and they performed perfectly.
Re formatted card and reload project.
Received board sensor - I pushed enter key and z axis was low and snapped bit.
New bit, New card new project and still receive the rrors.
Z axis stall and clear board sensor.
Could it be the cable or something more. Cable seems common to both errors.
Thoughts