gavel and base ptn

[myshop1044]

attached is a picture of the business card sent to me. maybe a ptn of the picture would be great or a separate gavel
and base might work too. I have a good gavel ptn but not a good base. any help would be great.

[oscarl48]

Quick and dirty attempt at a pattern. One done with a bas relief and another using .stl method so different geometries.

Edit: 12 hours later and looking at my patterns they are really flat. I'll play with them again after work to see if I can get it a little better.

[oscarl48]

I have my glass of tonic water with a splash of vodka and plugging away. Hopefully this one is closer to what you need. Re-did the mesh and was able to get a little bit more height in the pattern. Let me know if it needs to be tweaked some since I have the 3d model done its easy to build patterns from it.

[myshop1044]

Thank you oscarl48 (http://forum.carvewright.com/member.php?18133-oscarl48) for you efforts.