PDA

View Full Version : Y axis stall 299



RayDoggett
03-28-2015, 06:50 PM
it has done this to me twice. 3\4 through a 3 hour carve. can i save the carving? and why do I get this error the y axis seems to be clean

Digitalwoodshop
03-28-2015, 06:55 PM
Y Stalls is normally all about the two 685ZZ Roller Bearings in the Gearbox having gone bad..... Recommended to replace them every 250 cut hours.

Same place twice and it could be a deeper cut and a dull bit....

AL