PDA

View Full Version : What is a error E49-0331



First Sergeant
03-21-2015, 04:45 PM
Continue to get error message E49-0331. Is there more to it that just tracking roller failed?

bergerud
03-21-2015, 05:00 PM
When exactly do you get this error? Measuring the far end of the board?

Mugsowner
03-21-2015, 06:45 PM
When does this happen?

First Sergeant
03-21-2015, 07:17 PM
As the board moves left (viewed from keypad side), it drops then I get tracking roller error am able to continue.

bergerud
03-21-2015, 07:31 PM
Check the front roller switch. If the board leaves the brass roller before the front roller drops, I think you get a tracking error. Maybe the front roller switch is stuck on.

Mugsowner
03-21-2015, 10:55 PM
The switches are in the sensor check option. On the keypad press 0 then 7 and scroll down with the down arrow. The first or second senor screen down, you will see roller switches. they both should indicate released with no wood in the machine. You can manually push the rollers up and the message should read compressed.