PDA

View Full Version : Awesome prices for LED strips and accessories



zan29
03-11-2015, 06:48 AM
Found this website and they ship both CAN and USA. The prices are very low compared to what I've seen out there.
Have a look!
http://www.banggood.com/Wholesale-LED-Strip-c-2512.html

Suzanne

CNC Carver
03-11-2015, 07:07 AM
Very nice price and seems like good responses also. Thanks for sharing!

bergerud
03-11-2015, 08:47 AM
I tried this guys out lately. Shipping took awhile. Bought some cutting bits!

http://www.banggood.com/10Pcs-18inch-2-Flute-Carbide-Endmills-For-Wood-Or-Plastic-Work-p-931762.html

CNC Carver
03-11-2015, 10:11 AM
Have you tried cutting bits yet? If so any problems?


I tried this guys out lately. Shipping took awhile. Bought some cutting bits!

http://www.banggood.com/10Pcs-18inch-2-Flute-Carbide-Endmills-For-Wood-Or-Plastic-Work-p-931762.html

bergerud
03-11-2015, 10:20 AM
Have you tried cutting bits yet? If so any problems?

No, I have not really given them a run. I have many other similar bits. They will probably not last that long before getting dull, but, at the price it is worth it. I really like these short bits as they hardly ever break.

CNC Carver
03-11-2015, 10:27 AM
OK thanks! Probably place an order and give them a try.
Jeff

No, I have not really given them a run. I have many other similar bits. They will probably not last that long before getting dull, but, at the price it is worth it. I really like these short bits as they hardly ever break.

flyingemt
03-11-2015, 10:54 AM
Dan,

I took a look, are you using the Rock Chuck still? Or do you have a way to press the adapters for Carvetight?

Mike

bergerud
03-11-2015, 11:07 AM
I have never had a Rock chuck. I use an ER20m spindle I made myself. For these small bits, I can either use my ER20m spindle with a 1/8" collet or the ER11m adapter with a 1/8" collet in my ER20m spindle with a 1/2" collet. The ER11m adapter works in the CT as well. (Everyone should have an ER11m adapter!)

bergerud
03-11-2015, 11:21 AM
Sorry Suzanne, I seem to have caused a thread highjack.

zan29
03-11-2015, 11:56 AM
Not a problem Bergerud, I'm sure I did the same with someone else!

Sorry Suzanne, I seem to have caused a thread highjack.

aokweld101
03-11-2015, 02:26 PM
Zan, very nice of you alot of good products......

interloper
03-31-2015, 01:32 PM
berg, will that adapter work for 1/16" bits? I bought some of these for veneer splicing (think artistic zigzags) at 1.5" long with a 1/8" shank. Wondering what a cost effective solution would be to get these into a CW bit adapter. Any info on the collet that works for you?

I, too, am sorry for the hijacking! I just feel awful

cestout
04-01-2015, 01:08 PM
Thank you Suzanne
Clint