jerrbitt
02-12-2015, 02:11 PM
I'm considering making about ten cribbage boards for Christmas presents.
If you are familiar with the game, it requires drilloing a series of holes in tworows 1/8 diameter and the distance between each hole lengthwise is 5/16"
The attached photos show the layout
Obviously laying out such a board by hand by marking up a wood piece is time consuming and less acurrate
I feel sure the machine can drill the holes with no problem but can the designer lay it our with the needed precison.
Any suggestions would be appreciated.
If you are familiar with the game, it requires drilloing a series of holes in tworows 1/8 diameter and the distance between each hole lengthwise is 5/16"
The attached photos show the layout
Obviously laying out such a board by hand by marking up a wood piece is time consuming and less acurrate
I feel sure the machine can drill the holes with no problem but can the designer lay it our with the needed precison.
Any suggestions would be appreciated.