Lighting not right

[cjudas]

73888





I used an LED puck light, carve settings are from the "Tips & Tricks" .180 depth and 450 height. Any suggestions on better lighting and quality?

[fwharris]

If you have not done so, line the inside of the box with a reflective surface like aluminum foil or foil tape. Mount the puck light on the base of the box. The foil tape should reflect the light to avoid the direct glare.

[myshop1044]

how deep is the box, mind is 4.5" deep, I had to play with the depth to get the right cone for the light.
the litho is 5 x 7

[zan29]

I use light diffusers with all my lithos. That way you can use any type of light, just need to watch for heat. I bought a whole panel and just cut out what I need.
http://www.homedepot.com/p/Plaskolite-23-75-in-x-47-75-in-Clear-Polystyrene-Light-Panel-1A25001A/100542281

[atldal]

I would agree on the depth issue to, might be too shallow