Virtual board color and unlocking centering project

[Bob Victor]

How would I change the virtual board to a grey color I've seen on some MPC's posted? After centering a project both horiz. & vertically, I've tried to move it and it won't move. I believe I read somewhere in the forum, a method to unlock it so it can be moved again. Does anyone recall where the thread was posted?

[FWMiller]

You can undo the centering the same way you enabled it. Selecting from the menu toggles it on and off.

[PSQRD]

Once you center horizontally or vertically it will lock it you can either click the button in the upper left (Looks like a little board with a line through it and an "X" or "Y" in the corner) or right click and center then uncenter. It should free up.

[mtylerfl]

For virtual board color additions, there are many posts on this and some are many years old. Here is a good one from Eddie (read the entire thread...Eddie has some naming convention details you will need to know):

http://forum.carvewright.com/showthread.php?22109-Woods1&highlight=wood1

About six or seven years ago, I posted 12 color swatches for additions to the virtual board colors. Here is the link:

http://carvebuddy.com/free_stuff.html