PDA

View Full Version : error (23)



mikelf
09-23-2014, 03:05 PM
I got an error(23) trying to format and erase memory card. I'm still new anybody out there got any suggestions. I could sure use some help. Thanks to all who read and for the help.:confused:

henry1
09-23-2014, 04:06 PM
you stick around till some one answer you if you can we need more info

fwharris
09-23-2014, 05:58 PM
Was there any other info you got besides the error 23?

mikelf
09-23-2014, 10:57 PM
Thanks the only message I got was error 23 to call lhr tech. for help.

mikelf
09-23-2014, 11:10 PM
The message reads. An unknown error (23) occurred while compiling project. Please report this problem to LHR tech. for a fix. Cannot continue sorry.

Thanks Mike

bergerud
09-23-2014, 11:17 PM
Does the error happen with all project uploads? Have you tried uploading just a simple project?

mikelf
09-23-2014, 11:31 PM
it will not let me upload anything

bergerud
09-23-2014, 11:52 PM
Try different usb ports. Check for bent pins in the reader.

If another CW owner lives near you maybe you could swap cards and readers to trouble shoot.

fwharris
09-24-2014, 01:35 AM
Can you access the card using "flash manager"?

henry1
09-24-2014, 07:07 AM
it will not let me upload anything
Are you in the usa or Canada

henry1
09-24-2014, 08:30 AM
Try different usb ports. Check for bent pins in the reader.

If another CW owner lives near you maybe you could swap cards and readers to trouble shoot.
Bergerud that is a great ideal it to find out were he live and he is central time or P time or Eastern time

Metallus
09-24-2014, 11:38 AM
You have an older version of designer running, probably. The latest versions are 1.187, 2.007, and 3.000. Please upgrade your respective version.

mikelf
09-24-2014, 10:34 PM
I am in Mississippi south ms.

Mike1
01-15-2016, 04:24 AM
Did you ever get it solved, if so how. I am now having the same problem, I used the suggestions that were on this thread, but still not working. Thank you.

Mike1
01-15-2016, 05:25 AM
FYI, now working. re-flashed, rebooted and a new usb port. At first, card was also quite cold. Thanks