PDA

View Full Version : Growth Chart



dehrlich
04-17-2014, 04:50 PM
Wondering if anyone has a pattern for a growth chart? One that looks like a ruler that you put on the wall and mark a childs growth. About 6-1/2 feet, marks every inch... anyone ever done one? I would appreciate it!

myshop1044
04-17-2014, 08:24 PM
I am attaching a picture of the growth chart I carved a while back, it is not my design, so I am contacting my friend to see if he wouldn't mind if I passed it on to you. I used small shaker pegs.
You place it about 18" off the floor to get the correct height for little kids.

easybuilt
04-18-2014, 08:56 AM
Here is one I recently carved with my large cnc. Eddie has another design you may be able to purchase for the carvewright.

dehrlich
04-18-2014, 12:41 PM
I couldn't find one on Eddies site. I will get to work on one of my own I guess. Thanks guys!

dehrlich
04-18-2014, 05:41 PM
69119

Ok I put this together, is there a way to like choose all of the marks and make sure they are exactly lined up using the number boxes? Or do I have to go one by one and enter the same measurement from the edge?

ebrown17
04-18-2014, 07:09 PM
Here's one I did a few weeks ago, however, I'm not sure how to post the file.

69122

CW-HAL9000
04-18-2014, 07:51 PM
click on reply, then go advanced. then click on the paper clip that says manage attachments. Then click add files and then choose file and select the file from your computer.

ebrown17
04-18-2014, 08:11 PM
Hope this works.

blhutchens
04-18-2014, 08:14 PM
69119

Ok I put this together, is there a way to like choose all of the marks and make sure they are exactly lined up using the number boxes? Or do I have to go one by one and enter the same measurement from the edge?

you can select all the marks then go to layout and align tops or bottoms

bergerud
04-18-2014, 08:22 PM
69119

Ok I put this together, is there a way to like choose all of the marks and make sure they are exactly lined up using the number boxes? Or do I have to go one by one and enter the same measurement from the edge?

Use a snap grid.

keninar
04-19-2014, 06:06 PM
Here's one I made for my grandson for Christmas.

Should work as a starting point for your enhancement.

Done w 1.187 and Centerline - 90 V bit

EMAW!

keninar69138

mtylerfl
04-19-2014, 06:37 PM
Nice! Thank you for sharing your Growth Ruler mpc. Great for parents and grandparents, alike!