Memory card size.

[63falcon757]

I designed a sign for my shop that was over the 7777 card size by 2000 or so. The design was 5ft originally , now it's 3ft or so due to the size of the card memory. Is there a bigger card available, or can I run a cable from the computer to the carvewright?

[DocWheeler]

That's quite an mpc! You can not directly connect the CW to your computer.
The mpc must be compiled for the firmware to use it.

You should be able to do it with multiple mpcs, either splitting it (top/bottom or left/right) or doing parts of the whole thing in separate mpcs.

[63falcon757]

That's a good idea. I can break it down into 2 different patterns. I'd really like to do it at 5ft. Thank you