Table Front Design Help

[CLARKSCUSTOMDOORS]

Here is a design for a front of a table that a friend on mind would like for us to build for them.
This is a little above my head so thankful maybe someone could help. And give me any suggestions.

Thanks,
Hope

[eelamb]

try this image. Import it into designer, invert it, and click the down arrow once to get rid of the background.

[henry1]

Here is a design for a front of a table that a friend on mind would like for us to build for them.
This is a little above my head so thankful maybe someone could help. And give me any suggestions.

Thanks,
Hope
Hope this help mpc

[CLARKSCUSTOMDOORS]

Thanks for the help, going to give it a try!!!!

[cestout]

Henry ddidn't mention, select the pattern, click on tools, then outline patterns. Then cut path and flip the cut. Before you do that you could create a rectangular carved out area at each end at the default depth of .25, include those in your cut bath and you will have tenons to stick in the legs.
Clint

[henry1]

I did not mention it thinking he would want it bigger or longer the do what you said cesout