View Full Version : 3/16 carving bit over the 1/16....why?
TurtleCove
09-24-2013, 12:27 AM
Can someone explain when/why I'd use the 3/16 carving bit over the 1/16?
I've been using the 1/16 carving bit for years.
fwharris
09-24-2013, 12:28 AM
For carvings that have less detail and to shorten the carve time.
That is all they have done for me
Bigtyme
09-24-2013, 09:41 AM
I just bought a 3/16" carving bit and should have bought it long ago. It is the perfect choice for certain carves that don't have intricate detail, but long carve time. I am doing some chairs and the seats were 2 1/2 hours in the "Draft" mode using a 1/16" bit, but now are 1 hour and 15 minutes using a 3/16" bit. Saving a lot of wear and tear on the machine as well....
TurtleCove
09-24-2013, 05:08 PM
Excellent.
looking on Ebay for one.....
yhey all seem to have 3/16" shanks.....which will be an issue with the Rock chuck.....correct?
fwharris
09-24-2013, 05:17 PM
Excellent.
looking on Ebay for one.....
yhey all seem to have 3/16" shanks.....which will be an issue with the Rock chuck.....correct?
You will need a collet/sleeve to size up to the 1/2" chuck if that is what you have...
TurtleCove
09-24-2013, 06:06 PM
I'm not finding anything like that on ebay.
i can adapt up to 1/4" or 1/2"
can someone help?
unitedcases
09-24-2013, 06:22 PM
What size rock. I use a 1/4 with a collet that reduces it from 1/4 to 3/16. Bought it from ron justice, the same place you get the rock. Also have a 1/2 rock for big bits.
TurtleCove
09-25-2013, 11:59 AM
My Rock is 1/2".
i didn't know Ron sold a bushing that went from 3/16" to 1/2".
chief2007
09-25-2013, 12:19 PM
Yes he does I have that very adapter and it works well.
unitedcases
09-25-2013, 01:13 PM
His website is www.cw-parts.com I believe.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.