PDA

View Full Version : 1/8" bit and 1/16" ball nose bit...where do you buy them?



TurtleCove
07-29-2013, 06:00 PM
I noticed when selecting a bit for putting an edge on my board, I see a 1/16" and 1/8" ball nose bit.
But, I don't see those bits in the Carvewright store.

Where do ya'll get those bits?

lawrence
07-29-2013, 06:04 PM
As far as I know, these are the carving bits (the 1/16 came with your machine and the 1/8 is available from CW)

I'm 85% sure of this :)

Lawrence

Geomoo1
07-29-2013, 06:19 PM
Lawrence is correct. These are what CarveWright call carving bits. They need to standardize the descriptive terms used for their bits. I agree that this is very confusing. Not to be confused with the 1/8" and 1/16" cutting bits which are straight bits, not ball nose..... I think.