PDA

View Full Version : Non square radius cut



ChipperBob
02-10-2007, 04:58 PM
First effort, tried to cut a small project for box bottom. One side of pattern cut OK but the other had a staircase cut (see attached photos). When loaded program no errors were indicated. The board was long enough to be under the rollers at all times. Work piece appeared to be secure in machine.

Jeff_Birt
02-10-2007, 05:11 PM
Someone else had a post about this a few days ago. The cause was something about not using the 'Stay under rollers' option. Use the search function (top right of screen) to find the other post.