Flash Memory Card

[Rickrljones]

It would seem like that the memory card for the CW machine should be longer or with a hand grip or so... It's hard to remove the card from its slot without having to squeeze on it, fearing it might damage the card, anyone else having this problem.
Thanks :roll:

[HandTurnedMaple]

I agree, especially since my left thumb is shorter than it used to be thanx to a stupid move with my jointer a few years ago.

[Skippy]

There was a very early post that had a fix that I used after I ran into the same problem. Take a piece of tape (I used duct tape) about 4" long and put i on the card about 3/8" onto the card, double backck on itself so it is the same distance onto the card on the other side. Works Great!!

[Rickrljones]

Thanks for your input, will give a try...

[Digitalwoodshop]

Saw that first posting and did it first thing.

Yes, The tape works great, I used fiber packing tape and it made removal very easy. Now just to get time to play on the machine.

AL