Max cut depth

[JuicyCarp]

I have a project carving at the moment in a 1" thick board. During the measure and hecking bits stage of loading the project, i loaded the 1/8th cutting bit, the machine measured and said it ws too thick to cut. I selected continue figuring i would just stop the project before the cutting bit phase of things. My question is what is the maximum board thickness you can have for a cut path? Will the machine do 1"?

[chief2007]

Per the CW Manual - The maximum cut depth as stated in this Manual is 1" for the straight 1/8" cutting bit.

But you would need to do it using the multi pass option or risk breaking your bit.

[lynnfrwd]

Cut should be 1". Carve should be .8.


Sent from my iPhone using Tapatalk